Portland HVAC Company serves Portland and San Patricio County with the full range of residential and commercial heating and cooling work. That means AC repair and service, furnace and heating repair, heat pump work, ductwork, thermostats, indoor air quality, full system replacement, and emergency calls when the heat or cooling goes out at the worst possible time.
Call (361) 282-6149 to get a quote. We are available every day from 7:00 AM to 8:00 PM.
Careful with your home. Clear about the work. Straight on the price.
No matter what is going wrong with your heating or cooling, the work falls somewhere on a spectrum from a quick repair to a full system replacement. We handle both ends of that spectrum and everything in between, for homeowners, landlords, property managers, and commercial operators across Portland and the surrounding area.
The calls that come in most often are straightforward: a system that stopped working overnight, a room that will not cool down no matter where the thermostat sits, a furnace that will not ignite on the first cold morning of the year, a heat pump running in the wrong mode. Heat pumps, furnaces and mini-splits all within scope, so whatever equipment is in the building, we can work on it.
One call gets the whole thing moving.
The hardest part of an HVAC problem is knowing when to call, and with air conditioning the signs are usually clear enough: warm air coming from the vents when the thermostat says it should be cool, a frozen evaporator coil, water pooling around the air handler, a compressor that cycles on and off every few minutes, or noise from the condenser that was not there last summer.
A service call starts with a diagnostic. The technician who comes out identifies the fault, walks you through what it is, and confirms the repair before any work goes ahead. That applies to central air systems and ductless mini-splits alike, both are within scope on the same call.
Refrigerant leak diagnosis, coil cleaning, contactor and capacitor checks, airflow testing through the duct system: the diagnostic covers what the symptom points to, not a fixed checklist that runs the same way every time. We find what is actually wrong before anything gets replaced.
We'll find the fault and set it right.
HVAC work like this is the bulk of what a season brings, and furnace calls tend to cluster on the first genuinely cold nights of the year. A furnace that will not ignite, a pilot light that keeps going out, a system that short-cycles and shuts off before the house reaches temperature, cold air blowing from the vents when the heat is on, unusual noise from the cabinet: these are the calls that fill the schedule in fall and early winter.
The visit covers a diagnostic of the specific fault. Whether the issue is a gas furnace or a heat pump running in heating mode, the process is the same: identify the problem, explain what it is and what fixing it involves, and confirm the repair before it goes ahead.
Energy-bill concerns treated as a diagnostic clue means that if a furnace is working but the bills have climbed, that is worth investigating on the same call. A heat exchanger that is not sealing properly, a blower running at the wrong speed, or a thermostat that is not reading the space accurately can all show up in the energy numbers before they show up as a breakdown.
We'll confirm the repair with you before it goes ahead.
Getting your comfort back is easier than you think, even when the call comes in on a difficult day. Emergency calls are taken every day from 7:00 AM to 8:00 PM, and short-notice work is available when the schedule allows.
That covers both residential and commercial situations: a system down in the middle of a Texas summer, a furnace that stopped working the night before a cold front arrives, a rooftop unit that has gone out at a commercial property with tenants or customers inside. The scope of the problem and what it will take to address it are confirmed before the visit is scheduled.
Nobody books a visit before you know what it covers. Call to describe what the system is doing, and you will get a clear answer on what the visit involves and what it costs before anything is set.
We'll get your home comfortable again fast.
Portland sits on the Texas Gulf Coast in San Patricio County, where the climate shapes which HVAC jobs come up most often. Long, humid summers put real hours on cooling equipment. Winters are mild by most standards but cold enough that a furnace or heat pump needs to perform when temperatures drop. High coastal humidity adds a layer of complexity that a standard AC system does not always address on its own. The three services below reflect what this area actually needs.
A full system replacement comes up when repair stops making sense: equipment that has been failing repeatedly, a unit that is aging out of the range where parts are easy to source, or a system that simply cannot move conditioned air through the home the way it used to.
When a replacement call comes in, the visit starts with a proper assessment of the existing system and the space it serves. In a coastal Texas climate where the cooling load runs high for much of the year, sizing matters. An undersized unit runs constantly and never quite catches up. An oversized one short-cycles and leaves humidity behind even when the temperature reads correctly.
The quote covers the new HVAC system, what the installation involves, and the scope of work from start to finish. Permits handled where the job needs them, so nothing is left unresolved after the work is done.
The Gulf Coast climate is well-suited to heat pumps. Winters here are mild enough that a properly sized heat pump can handle the heating load efficiently without relying on backup resistance heat, and the same unit serves as the primary cooling system through the long summer. That makes heat pump installation a practical choice for new installs and for homeowners replacing aging equipment.
Installation work covers new heat pump systems, replacement of a unit that has reached the end of its service life, and ductless heat pump options for spaces where running new ductwork is not practical. The diagnostic call covers what the space needs, what equipment fits the load, and what the installation involves from the first visit through the completed job.
A quick tune-up and a full system swap are two different jobs, and whole-home dehumidification sits in its own category alongside them. Portland's coastal humidity is not just a comfort issue. High indoor humidity makes a space feel warmer than the thermostat reads, which means the AC works harder and runs longer to reach the same level of comfort. It also affects air quality in ways that air filtration alone does not fully address.
A whole-home dehumidifier ties into the existing HVAC system and manages moisture levels across the whole house rather than one room at a time. That works alongside air filtration and indoor air quality improvements to make the air easier to breathe and the cooling system more efficient.
We'll confirm the repair with you before it goes ahead.
The hardest part of an HVAC problem is knowing when to call, and sometimes the issue is not the equipment itself. A thermostat that is not reading the space correctly, a duct system leaking conditioned air into the attic, or an air handler that has not been serviced in years can all degrade comfort without triggering an obvious breakdown.
We handle thermostat installation and smart thermostat setup, including Nest, Ecobee, and programmable controls that give more precise management over heating and cooling schedules. Duct leak repair and sealing address the efficiency losses that happen when supply air never reaches the rooms it is meant to condition. Air filtration and UV air purifier installation round out the indoor air quality side, which matters especially in a coastal climate where humidity and airborne particulates are part of the picture year-round.
These jobs often come up alongside a repair or replacement call. If the ductwork looks like a problem during a service visit, we will say so and quote it separately so you can decide.
A seasonal tune-up is worth scheduling before the system is under load, not after it has already struggled through a few hot weeks. On the cooling side, a spring AC tune-up covers refrigerant level checks, coil cleaning, contactor and capacitor inspection, condensate drain clearing, and airflow confirmation through the duct system. On the heating side, a fall check covers the heat exchanger, ignition system, blower performance, and thermostat calibration for furnaces and heat pumps alike.
The Gulf Coast cooling season is long. A system that goes into summer with a marginal refrigerant charge or a partially blocked coil will show it in the energy bills before it shows it as a breakdown. HVAC preventive maintenance catches those conditions when they are inexpensive to fix.
Commercial HVAC maintenance follows the same process: a scheduled visit, a documented check of the equipment, and a clear report of anything that needs attention. Property managers and business owners can schedule routine service for rooftop units, split systems, and multi-zone setups the same way a homeowner would.
We'll find the fault and set it right.
Property managers, small business owners, and commercial property operators in San Patricio County deal with the same equipment failures as homeowners, often with more urgency. A rooftop unit going down in July affects everyone in the building. A commercial heat pump running in the wrong mode drives up the energy bill until someone notices.
We handle commercial AC repair, commercial heating repair, rooftop unit service and replacement, commercial heat pump work, and full commercial HVAC replacement. The diagnostic and quoting process works the same way it does on the residential side: the scope and price are confirmed before work starts, and the repair is explained before it goes ahead.
Code-compliant work. Clear diagnosis. Pricing set out up front.
When you call for a quote, you get the rate on the phone. The diagnostic fee, what the service call covers, and the repair or installation estimate are all explained before anything is scheduled. The price is settled when the job is scoped, not after the work is done.
That applies across the board: AC repair cost, furnace repair cost, heat pump repair or replacement, full HVAC installation, and system replacement. If the diagnostic points to a repair that needs parts, the system is checked and the fault is identified before parts are quoted. You know what the visit found and what fixing it involves before you decide to go ahead.
HVAC installation and replacement quotes cover the equipment, the labor, and anything else the job requires. Ask what is included and you will get a straight answer.
Careful with your home. Clear about the work. Straight on the price.
Portland is the primary service area, and we work throughout San Patricio County and the surrounding communities. That includes Aransas Pass, Ingleside, Rockport, Sinton, Taft, and Gregory, along with the residential neighborhoods and commercial properties in between.
If you are not sure whether your address is covered, call and ask. Most of the area is within reach, and the call will confirm it.
Available every day from 7:00 AM to 8:00 PM.
Call (361) 282-6149 for a quote.
When you call, the person who answers will go through what the system is doing, what type of equipment you have, and what the job involves. From there, a price is confirmed and a visit is scheduled when you are ready. Nothing is booked before you know what the visit covers and what it costs.
When you call during business hours, a real person who knows the trade answers. That person can scope the job on the phone, explain what the visit includes, and confirm pricing before anything is scheduled. We are available every day from 7:00 AM to 8:00 PM.
It helps to know the type of system you have, the rough age of the equipment if you know it, and a clear description of what the system is doing or not doing. If you have a model number on the unit, that can speed up the scoping conversation, but it is not required to get a quote. The more detail you can give on the phone, the more accurate the initial estimate will be.
The price confirmed on the call is based on what has been scoped at that point. If the diagnostic turns up something the initial call did not account for, that is explained before any additional work goes ahead. No repair proceeds without your approval, and the cost of any additional scope is confirmed before it is carried out.
Any of these warrant a prompt call: warm air from the vents when the thermostat is set to cool, short-cycling that never reaches temperature, unusual noise from the indoor or outdoor unit, or a unit that will not turn on at all. A system that is short-cycling or blowing warm air in summer is often signaling a refrigerant or airflow fault that gets worse if left running.
Call (361) 282-6149 and describe what the system is doing, and we will tell you how urgent the situation looks.
That depends on the current schedule, which is confirmed on the call. For emergency situations where a system is completely down, short-notice work is available when the schedule allows. We are available every day from 7:00 AM to 8:00 PM, so calling early in the day gives the most scheduling flexibility.
System size and home size do affect the scope of some jobs, particularly for full system replacement and installation work where load calculations are part of the process. For repair calls, the price is based on what the diagnostic finds rather than on square footage. The rate is confirmed on the phone before anything is scheduled, so you know what to expect before the visit is booked.
Yes, and it makes a real difference to how smoothly the visit goes. A clear path to the indoor unit, enough space around the outdoor condenser to work safely, and access to the furnace or air handler without moving stored items all save time on the visit. If the equipment is in a tight space or behind a locked area, mention that when you call so it can be factored into the scheduling.
Call (361) 282-6149 as soon as you know the timing needs to change.
We will work out a new time that fits the schedule. Giving as much notice as possible helps, particularly for short-notice or emergency bookings where another call may be waiting.
Call (361) 282-6149. We are available every day from 7:00 AM to 8:00 PM.
The process is straightforward: call, describe what the system is doing, get the scope and the price, and schedule the visit when you are ready. Nothing is booked before you know what it covers and what it costs.
Code-compliant work. Clear diagnosis. Pricing set out up front.
Call now and get the quote on the phone.
Portland sits on the Gulf Coast, and the climate here puts real demands on heating and cooling equipment. High heat, persistent humidity, and a long cooling season mean the work ranges from routine seasonal tune-ups to full system replacements, and we handle all of it. The table below lays out what each service covers, who it fits best, and a practical note to help you decide where to start.
| Service | What It Covers | Best For | Helpful Details |
|---|---|---|---|
| Ductwork Repair & Sealing | Leak location and sealing, Airflow testing after repair, Duct replacement where needed | Homes with uneven room temperatures or energy bills that have climbed without an obvious reason | In a humid coastal climate, leaking ducts also allow unconditioned air to enter the system, which raises indoor humidity alongside energy costs |
| Seasonal Maintenance & Tune-Ups | Refrigerant level check, Coil and airflow inspection, Low-voltage control wiring review | Any property that wants to catch small problems before the peak cooling or heating season | Early spring is the best window for an AC tune-up here, before the long Gulf Coast cooling season gets underway |
| Full System Installation & ReplacementMost Popular | Load calculation for the space, Old system removal, New equipment installation and commissioning | Homes or buildings where repeated failures or significant efficiency loss make repair the wrong call | Correct sizing matters especially in a coastal climate where the cooling load is high for much of the year |
| Heat Pump Installation | Load calculation, Refrigerant line set connection, Low-voltage control wiring on the unit | Properties replacing an aging system or adding cooling and heating to a space without existing ductwork via mini-split | Mild-to-moderate Gulf Coast winters mean a heat pump operates efficiently for most of the heating season here |
| Indoor Air Quality & Air Filtration | Filter sizing for the air handler, Whole-home filtration installation, Air purifier integration | Households concerned about airborne particles, allergens, or indoor humidity affecting comfort and health | Filter sizing affects airflow balance across the whole system, so an oversized or undersized filter shows up as reduced efficiency and uneven temperatures |
| Heating & Furnace Repair | Ignition sequence check, Heat exchanger inspection, Blower motor and airflow test | Properties where the furnace is blowing cold air, failing to ignite, or short-cycling on cold nights | Winters here are mild but real, and a furnace that struggles in November usually fails by January |
| AC Repair & Service | Refrigerant diagnosis, Coil and airflow inspection, Thermostat communication check | Homes or businesses with an AC that is blowing warm air, running constantly, or cycling on and off | Gulf Coast summers are long and the cooling load is high, so catching a fault early keeps the compressor from taking additional strain |
| Heat Pump Repair & Service | Reversing valve diagnosis, Refrigerant circuit check, Defrost cycle and airflow test | Properties with a heat pump that is not keeping up in summer or blowing cold air in heating mode | The Gulf Coast climate keeps heat pumps in an efficient operating range for most of the year, making faults here worth addressing promptly |
| Thermostat & Smart-Control Installation | Compatibility check with existing system, Wiring and calibration, Controls walkthrough | Properties with a thermostat that is reading incorrectly, failing to trigger the system, or due for an upgrade | A thermostat mismatch can make an otherwise healthy system behave erratically, so compatibility is confirmed before installation |
| Emergency HVAC Service | Scoping on the call, Diagnosis of complete system failure, No-heat and no-cool calls | Any property where the system is completely down and waiting is not an option | We are available every day from 7:00 AM to 8:00 PM, and the job is scoped and priced on the call before anything is scheduled |
| Whole-Home Dehumidification & Humidity Control | Unit sizing to the home, Integration with existing air handler, Condensate routing | Homes that feel humid indoors even when the thermostat reads correctly | High ambient humidity on the Gulf Coast strains AC systems and shows up in indoor comfort long before the temperature reading reflects it |
Call (361) 282-6149 to get a price on your HVAC job, confirm what the visit covers, and get on the schedule. We are available every day from 7:00 AM to 8:00 PM.
(361) 282-6149